Pro-Flo 4 EFI Traditional 4150-Style Kit #35650 For 70-91 AMC 304 360 390 401

$4,159.90 USD
$4,159.90 USD $4,159.90 USD
Pro-Flo 4 EFI Traditional 4150-Style Kit #35650 For 70-91 AMC 304 360 390 401

Pro-Flo 4 EFI Traditional 4150-Style Kit #35650 For 70-91 AMC 304 360 390 401

$4,159.90 USD
$4,159.90 USD $4,159.90 USD
The Edelbrock Pro-Flo 4 EFI Kit #356500 W/O Tablet for 1970-1991 AMC 304, 360, 390, 401 CID engines is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Victor Jr.-style single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors are included along with distributor, wire harnesses, ECU and Android-based tablet with E-Tuner Calibration app pre-installed. The Victor manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications. This kit uses 35 lb/hr injectors and is rated for 550 horsepower at 58 PSI of fuel pressure. Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner's initial programming. Once provided with basic information such as type of engine, cubic inches, firing order, and cam profile, the E-Tuner then selects the most appropriate base calibration. Once the base calibration is set, the self-learning E-Tuner takes over to continually maximize the fuel map for your specific engine configuration, even compensating for changes in altitude and weather. The E-Tuner provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for. No laptop tuning is required. Vehicle Specific
  • 1970-1991 AMC 304, 360, 390, 401 CID engines

Attributes:

  • Brand Name: Edelbrock
  • GTIN: 00085347890286
  • Bore Diameter: 1.75
  • Distributor Cap Included: Yes
  • Finish: Satin
  • Flange Type: 4150
  • Fuel Injector Type: 35 lb/hr
  • Fuel Pressure Port: 1/8-27 NPT
  • Gasket Or Seal Included: Yes
  • Idle Air Control Motor Included: Yes
  • Manifold Height: 5.74
  • Maximum Horsepower: 500 @ 43 psi/550 @ 58 psi
  • Quantity: Kit
  • RGL: WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
  • System Type: Traditional 4150-Style Kit
  • Wire Harness Included: Yes
  • Wiring Harness Included: Yes

Extended Information:

  • Country of Origin: US
  • Emissions : 3

Packing Information:

  • Quantity of Each: 1
  • Package UOM: EA
  • Dimension: 30 x 25 x 11 inches
  • Weight: 36.6 POUNDS

You may also like